Hampton Bay 26612 Installation Guide download pdf (Page 3)

Safety Rules ........................................1

Unpacking Your Fan ..........................2

Installing Your Fan ............................3

Operating Your Remote Control ......11

Operating Your Fan ...........................12

Care of Your Fan ................................13

Troubleshooting .................................. 13

Specications ......................................14

Warranty Information .......................15

1. To reduce the risk of electric shock, insure electricity

has been turned off at the circuit breaker or fuse box

before beginning.

2. All wiring must be in accordance with the National

Electrical Code ANSI/NFPA 70-1999 and local electrical

codes. Electrical installation should be performed by a

qualied licensed electrician.

3. WARNING: To reduce the risk of re or electric shock, do

not use this fan with any solid-state speed control device.

4. CAUTION: To reduce the risk of personal injury, use only

the screws provided with the outlet box.

5. The outlet box and support structure must be securely

mounted and capable of reliably supporting 35 lbs. (15.9

kg). Use only UL Listed outlet boxes marked “Acceptable

for Fan Support of 35 lbs. (15.9 kg) or less.”

6. The fan must be mounted with a minimum of 7 feet

clearance from the trailing edge of the blades to the oor.

7. Do not operate reversing switch while fan blades are in

motion. Fan must be turned off and blades stopped before

reversing blade direction.

8. Avoid placing objects in path of the blades.

9. To avoid personal injury or damage to the fan and other items,

be cautious when working around or cleaning the fan.

10. Do not use water or detergents when cleaning the fan or fan

blades. A dry dust cloth or lightly dampened cloth will be

suitable for most cleaning.

11. After making electrical connections, spliced conductors

should be turned upward and pushed carefully up into

outlet box. The wires should be spread apart with the

grounded conductor and the equipment-grounding

conductor on one side of the outlet box, and the ungrounded

conductor on the other side of the outlet box.

12. Electrical diagrams are for reference only. Light kits that are

not packed with the fan must be UL listed and marked suitable

for use with the model fan you are installing. Switches must be

UL General Use Switches. Refer to the instructions packaged

with the light kits and switches for proper assembly.

13. All set screws must be checked and retightened where nec-

essary before installation.

Safety Rules 1.

READ AND SAVE THESE INSTRUCTIONS

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL

INJURY, MOUNT TO OUTLET BOX MARKED ACCEPTABLE FOR FAN

SUPPORT OF 35LBS (15.9 KG) OR LESS AND USE SCREWS PROVID

ED WITH THE OUTLET BOX.

PLEASE REMOVE RUBBER MOTOR STOPS ON THE BOTTOM OF THE

FAN BEFORE INSTALLING BLADES OR TESTING THE MOTOR.

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE

BLADE BRACKETS WHEN INSTALLING THE BRACKETS, BALANCING

THE BLADES, OR CLEANING THE FAN.

1 2 3 4 5 6 7 8 ... 32 33

Comments to this Manuals

No comments

Hampton Bay 26612 Installation Guide Page 3

Comments to this Manuals

Related products and manuals for Household fans Hampton Bay 26612