Hampton Bay 34889 Instruction Manual download pdf (Page 13)

Troubleshooting 11.

Problem

Fan will not start.

Fan sounds noisy.

Remote control

malfunction.

Lights shut off and will

not come back on.

Fan Wobble.

Solution

1. Check circuit fuses or breakers.

2. Check line wire connections to the fan and switch wire connections in the switch housing.

CAUTION: Make sure main power is off.

1. Make sure all motor housing screws are snug.

2. Make sure the screws that attach the fan blade bracket to the motor hub is tight.

3. Make sure wire nut connections are not rubbing against each other or the interior wall of the switch housing.

CAUTION: Make sure main power is off.

4. Allow a 24-hour "breaking-in" period. Most noise associated with a new fan disappear during this time.

5. If using an optional light kit, make sure the screws securing the glassware are tight. Check that the light bulb

is also secure.

6. Do not connect the fan with a wall mounted variable speed control (s)

7. Make sure the upper canopy is a short distance from the ceiling. It should not touch the ceiling.

1. Do not connect the fan with a wall mounted variable speed control (s).

2. Check to make sure the dip switches from the transmitter and receiver are set to the same frequency.

1. This unit is equipped with a wattage limiting device. Lamping in excess of 190 watts will disable your ceiling

fan's light kit. To reset your light kit you must turn the power off and re lamp, keeping the wattage under 190

watts. Restore power to your ceiling fan and continue normal operation.

3. Check to make sure the dip switches from the transmitter and receiver are set to the same frequency.

NOTE: All blade sets are grouped by weight. Because wood and plastic blades vary in density, the fan

may wobble even though blades are matched.

1. Make sure all blade attachment screws are tight.

2. Make sure Outlet box is secured to building structure, if necessary use the wood screws provided to

further secure outlet box to joist.

3. Make sure Hanger Bracket is secure to the outlet box, screws are tight.

4. Use the balancing kit provided if the wobble is excessive (follow instructions included with balancing kit)

1 2 ... 8 9 10 11 12 13 14

No comments

Hampton Bay 34889 Instruction Manual Page 13