Hampton Bay 34889 Instruction Manual download pdf (Page 8)

Figure 13

White (neutral)

White (neutral)

Green or bare

copper (ground)

White ("AC IN N")

White ("to motor N")

Ground

(green)

(Connect to

ground wire on

hanger bracket

if no house

ground wire

exists.)

Outlet box

Black (hot)

Black ("AC IN L")

Black ("to motor L")

Receiver

Blue ("for light")

Blue (light)

Black (motor)

Fan

6. Finishing the

Installation

Step 1. Tuck connections neatly into the

ceiling outlet box.

Step 2. Slide the canopy up to ceiling and

over the two screws on hanger bracket.

Rotate canopy clockwise. Next, while

holding the canopy with one hand, slide the

canopy cover over the screws and rotate

clockwise until tight. Note: adjust the

canopy screws as necessary until the canopy

and canopy cover are snug. (Fig. 14)

7. Blade Installation

Step 1. Attach fan blade to the blade holder

and blade medallion using the 4 screws and

washers provided. (3 screws from the

accessory bag, 1 black gunmetal screw pre-

attached to the blade medallion). Tighten all

4 screws securely. (Fig. 15)

Step 2. Align holes from blade holder to

motor and secure with 2 screws provided.

Repeat procedure with remaining blades.

(Fig. 15)

Figure 15

Blade

Blade holder

Screws

Screws

Rubber

washers

Fiber

washers

Blade medallion

Black

gunmetal

screw

Figure 14

Outlet box

Hanger

bracket

Hanger

ball

Canopy

Canopy

cover

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments