Hampton Bay 24816-021 Instruction Manual download pdf (Page 8)

Attaching the light kit mounting

plate to the mounting ring

□ Remove one of the three mounting plate screws (JJ)

from the mounting ring (SS), and loosen the other

two screws. (Do not remove.)

□ Place the key holes in the light kit mounting plate (H)

over the two screws (JJ) previously loosened from

the mounting ring (SS). Turn the light kit mounting

plate (H) until it locks in place at the narrow section

of the key holes. Secure by tightening the two

mounting plate screws (JJ) previously loosened and

the one (JJ) previously removed.

Attaching the light kit to

the mounting plate

□ Remove one of the three light kit mounting screws

(KK) from the mounting plate (H), and loosen the

other two screws (KK). (Do not remove.)

□ While holding the light kit (I) under your fan (F), snap

together the wire connection plugs (TT).

□ Place the key holes in the light kit (I) over the two

mounting screws (KK) previously loosened from the

mounting plate (H). Turn the light kit (I) until it locks

in place at the narrow section of the key holes.

Secure by tightening the two light kit mounting

screws (KK) previously loosened and the one (KK)

previously removed.

Assembly — Installing the Light Kit

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Hampton Bay 24816-021 Instruction Manual Page 8