Hampton Bay 24816-021 Instruction Manual download pdf (Page 6)

Assembly — Completing the Fan Body

Installing the canopy

□ Make sure connections are neatly tucked in the

ceiling outlet box (NN).

□ Slide the canopy (B) up to the mounting bracket (A)

and place the key hole on the canopy (B) over the

loose mounting bracket screw (BB) on the mounting

bracket (A). Turn the canopy (B) clockwise until it

locks in place at the narrow section of the key holes.

□ Align the circular hole on the canopy (B) with the

remaining hole on the mounting bracket (A). Secure

the mounting bracket screw (BB) previously removed

in the hole, and tighten the two mounting bracket

screws (BB).

WARNING: Make sure the tab on the mounting bracket (A)

properly sits in the groove in the hanger ball/downrod

assembly (D) before attaching the canopy (B) to the mounting

bracket (A) by turning the canopy housing until it drops into

place.

NOTE: Adjust the mounting bracket screws (BB) as

necessary until the canopy (B) and canopy bottom cover (C)

are snug.

Attaching the canopy

bottom cover

□ Attach the canopy bottom cover (C) to the mounting

bracket screw (BB) heads on the bottom of the

canopy (B) by inserting the screw heads into the key

slots in the canopy bottom cover (C) and rotating the

canopy bottom cover (C) clockwise.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Hampton Bay 24816-021 Instruction Manual Page 6