Hampton Bay 24816-021 Instruction Manual download pdf (Page 3)

Assembly — Hanging the Fan

Attaching the mounting bracket

to the electrical box

Hanging the fan from the

mounting bracket

□ Pass the 120 volt supply wires through the center

hole in the mounting bracket (A).

□ Attach the mounting bracket (A) to the outlet box (NN)

with the screws and washers provided with your

outlet box (NN).

□ Securely tighten the two mounting screws.

WARNING: To reduce the risk of ﬁre, electric shock, or

other personal injury, mount the fan only to an outlet box or

supporting system marked acceptable for fan support and

use the mounting screws provided with the outlet box.

WARNING: The tab in the ring must rest in the groove of

the hanger ball/downrod assembly (D). Failure to properly

seat the tab in the groove could cause damage to the wiring.

□ Carefully lift the fan motor assembly (F) up to the

mounting bracket (A), and seat the hanger

ball/downrod assembly (D) in the mounting bracket

(A) socket. Make sure the tab on the mounting

bracket (A) socket is properly seated in the groove in

the hanger ball/downrod assembly (D). This will help

to balance the ceiling fan.

HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

1 2 3 4 5 6 7 8 ... 13 14

No comments

Hampton Bay 24816-021 Instruction Manual Page 3