Hampton Bay AG971-ORB Instruction Manual download pdf (Page 14)

WARNING

MAKE SURE THE POWER IS OFF AT THE ELECTRICAL PANEL BOX

BEFORE YOU ATTEMPY ANY REPAIRS. REFER TO THE SECTION,

“MAKING ELECTRICAL CONNECTIONS”.

Because of the fan's natural movement, some

connections may become loose. Check the

support connections, brackets, and blade

attachments twice a year. Make sure they are

secure. (It is not necessary to remove fan from

ceiling.)

Clean your fan periodically to help maintain its

new appearance over the years. Do not use

water when cleaning. Use only a soft brush or

lint-free cloth to avoid scratching the finish.

The plating is sealed with a lacquer to

minimize discoloration or tarnishing. Do not

use water when cleaning. This could damage

the motor, or the wood, or possibly cause an

electrical shock.

You can apply a light coat of furniture polish to

the wood blades for additional protection and

enhanced beauty. Cover small scratches with a

light application of shoe polish.

There is no need to oil your fan. The motor has

permanently lubricated sealed ball bearings.

Here are some suggestions to help you maintain

your fan.

Check main and branch circuit fuses or breakers.

Check line wire connections to the fan and switch wire connections in

the switch housing.

Make sure all motor housing screws are snug.

Make sure the screws that attach the fan blade bracket to the motor hub

is tight.

Make sure wire nut connections are not rattling against each other or

the interior wall of the switch housing.

Allow a 24-hour "breaking-in" period. Most noises associated with a

new fan disappear during this time.

If using ceiling fan light kit, make sure the screws securing the

glassware are tight. Check that the light bulb is also secure.

Make sure there is a short distance from the ceiling to the canopy. It

should not touch the ceiling.

Make sure your ceiling box is secure and rubber isolator pads are used

between mounting bracket and outlet box.

This unit is equipped with a wattage limiting device. Lamping in excess

of 190 watts will disable your ceiling fan's light kit. To reset your light

kit you must turn the power off and relamp, keeping the wattage under

190 watts. Restore power to your ceiling fan and continue normal

operation.

Fan will not start

Fan sounds noisy

Lights shut off and

will not come back

on.

Care of Your Fan Troubleshooting

PROBLEM SOLUTION

1 2 ... 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Hampton Bay AG971-ORB Instruction Manual Page 14

Comments to this Manuals

Related products and manuals for Household fans Hampton Bay AG971-ORB