Hampton Bay AG971-ORB Instruction Manual download pdf (Page 11)

8

Installing the Light Kit

Remove 1 of the 3 screws from the mounting

plate and keep it for future use. Loosen the

other 2 screws. (Do not remove)

Raise and hold the light kit assembly close to

the mounting plate and snap together the wire

connection plugs. (Fig. 13)

Place the key holes on the light kit assembly

over the 2 screws previously loosened from the

mounting plate, turn light kit assembly until it

locks in place at the narrow section of the key

holes. Secure by tightening the 2 screws

previously loosened and the one previously

removed. (Fig. 13)

Install 3 x 40W candelabra bulbs (included).

(Fig. 14)

Remove the metal nut from the light kit stem.

Raise the glass shade up against the light kit,

place the metal nut on the top over the stem and

turn it clockwise until it locks up against the

glass shade. Do not overtighten. (Fig. 14)

1.

2.

3.

4.

5.

Raise the glass cap and decorative nut against

the glass shade and secure them to the stem by

turning the decorative nut clockwise until

snug. Do not overtighten. (Fig. 14)

6.

NOTE

LIGHT BULBS HAVE NO WARRANTY; CAN BE

PURCHASED AT ANY HOME DEPOT STORE.

CAUTION

BEFORE STARTING INSTALLATION, DISCON-

NECT THE POWER BY TURNING OFF THE

CIRCUIT BREAKER OR REMOVING THE FUSE

AT FUSE BOX. TURNING POWER OFF USING

THE FAN SWITCH IS NOT SUFFICIENT TO

PREVENT ELECTRIC SHOCK.

Screws

Connection Plugs

Light Kit

Assembly

Mounting Plate

Figure 13

Figure 12

Mounting Plate

Mounting Ring

Screws

Installing the Mounting

Plate

Remove 1 of the 3 screws from the mounting

ring and loosen the other 2 screws. (Do not

remove)

Place the key holes on the mounting plate over

the 2 screws previously loosened from the

mounting ring, turn mounting plate until it

locks in place at the narrow section of the key

holes. Secure by tightening the 2 screws

previously loosened and the one previously

removed. (Fig. 12)

1.

2.

NOTE

MAKE SURE TO LEAVE ENOUGH SPACE

BETWEEN THE FAN PULL CHAIN AND THE

BULBS SO THE CHAIN DOESN'T RUB AGAINST

ANY OF THE BULBS.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments