Hampton Bay 14035 Installation Guide download pdf (Page 5)

Phillips screw driver; slotted screw driver; step-

ladder; wire cutters; electrical tape.

Tools Required

Mounting Options

Outlet box

Figure 1

Ceiling

joist

Ceiling

joist

Cross brace

Outlet box

Figure 2

Ceiling joist

or cross brace

Parallel

wood brace

Provide strong

support

Recessed

outlet box

Hanger bracket

opening must

be facing up-side

Figure 3

utl

et b

Figure 4

Ceiling

joist

Hanger bar

(optional)

Hanger

bracket

Angled ceiling

maximum

18 angle

If there isn't an existing mounting box, then read the

following instructions. Disconnect the power by

removing fuses or turning off circuit breakers.

Secure the outlet box directly to the building

structure. Use appropriate fasteners and building

materials. The outlet box and its support must be able

to fully support the moving weight of the fan (at least

50 lbs.). Use a UL Listed metal outlet box. Do not use

a plastic outlet box.

Figure 1, 2 and 3 are examples of different ways to

mount the outlet box.

Note: You may need a longer downrod to maintain

proper blade clearance when installing on a steep,

sloped ceiling. Longer downrods are available from

your Hampton Bay dealer.

To hang your fan where there is an existing fixture

but no ceiling joist, you may need to install a hanger

bar as shown in Fig. 4 (available at your Hampton

Bay dealer).

3. Installing Your Fan

1 2 3 4 5 6 7 8 9 10 ... 13 14

Comments to this Manuals

No comments

Hampton Bay 14035 Installation Guide Page 5

Comments to this Manuals

Related products and manuals for Household fans Hampton Bay 14035