Hampton Bay CF548KR-CL160 (ORB) Installation Guide download pdf (Page 7)

Please contact 1-855-HD-HAMPTON for further assistance.

MOC.YABNOTPMAH7

Assembly — Hanging the Fan

Attaching the mounting bracket to

the electrical box

□

Attach the mounting bracket (B) to the outlet box with

two screws and washers provided with the outlet box.

Make sure the mounting bracket (B) is tightened

securely.

To reduce the risk of ﬁre, electric shock, or WARNING:

other personal injury, mount the fan only to an outlet box or

supporting system marked acceptable for fan support

□

Loosen the two set screws (JJ) from the fan motor

assembly (H) coupling.

□

Remove the hitch pin (GG) and lock pin (HH) from the

downrod (F). Remove the hanger ball (E) from the

downrod (F) by loosening the hanger ball set screw (II),

and removing the cross pin (FF), then sliding the hanger

ball (E) off of the downrod (F).

□

Carefully feed the fan wires up through the downrod (F).

Thread the downrod (F) into the fan motor assembly (H)

coupling. Line up the holes and replace the lock pin (HH)

and hitch pin (GG). Tighten the set screws (JJ).

Attaching the downrod to the

fan motor assembly

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

No comments

Hampton Bay CF548KR-CL160 (ORB) Installation Guide Page 7