Hampton Bay 36945 Instruction Manual download pdf (Page 6)

4.

Hanging the Fan

REMEMBER to turn off the pow-

er. Follow the steps below to hang your

fan properly.

Securely attach the mounting plate to 1.

the outlet box using the two screws sup-

plied with the outlet box (Figure 4). Pull

the black, white and ground wires out of

the outlet box and through the hole in the

mounting plate and lay them to the side.

Carefully lift the fan motor assembly and 2.

engage the slot in the motor bracket with

the hook on the mounting plate so that it

is securely suspended (Figure 5). Then

connect the wiring to your fan according

to the section “Making the Electrical Con-

nections”.

Once wiring is completed, lift the motor 3.

bracket so that the threaded studs on the

mounting plate protrude through the slots

in the motor bracket (Figure 5). Securely

tighten the three 1/4” locknuts (supplied)

onto the threaded studs, then try to shake

the motor bracket to ensure that the assem-

bly is tight (Figure 6).

Fan Motor

1/4"Locknuts

(Supplied)(3)

Mounting

Plate

Switch Cup

Figure 4

Figure 5

Figure 6

FOR BETTER FAN PERFORMANCE, MAKE SURE

THE MOUNTING PLATE IS LEVEL. ADDITIONAL

WASHERS (NOT INCLUDED) MAY BE NEEDED

TO INSERT BETWEEN THE OUTLET BOX AND

MOUNTING PLATE (FIGURE 4).

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments