Hampton Bay 13087 Instruction Manual download pdf (Page 8)

6.

Figure 6

Finishing the Fan

Installation

1. Align the four screw holes in the canopy

with the four screw holes in the mounting

plate.

2. Secure the canopy in place by using the four

mounting screws that were removed in step

1, described on page 4 (Figure 4).

WHEN USING THE STANDARD BALL/DOWN-

ROD MOUNTING, THE TAB IN THE RING AT

THE BOTTOM OF THE MOUNTING PLATE MUST

REST IN THE GROOVE OF THE HANGER BALL.

FAILURE TO PROPERLY SEAT THE TAB IN THE

GROOVE COULD CAUSE DAMAGE TO WIRING.

Attaching the

Fan Blades

1. Attach blade to blade bracket, using the

blade bracket support plate, screws and

lockwashers provided (Figure 7). Start a

screw into the blade bracket. Repeat for the

remaining two screws.

2. Tighten each screw securely.

3. Remove the screw driver access cover on

the light kit plate to expose the blade bracket

screw holes (Figure 8a).

Screws and

Lockwashers

Blade

Blade Bracket

Support Plate

Screw Driver

Access Cover

Figure 7

Figure 8a

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 28 29

Comments to this Manuals

No comments