Hampton Bay YG419-NI Instruction Manual download pdf (Page 11)

Installing the canopy

Assembly — Hanging the Fan (continued)

11 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

□ Tuck the connections neatly into the ceiling outlet box

(LL).

□ Slide the canopy (B) up to the mounting bracket (A)

and place the key hole on the canopy (B) over the

loose mounting bracket screw (CC) on the mounting

bracket (A). Turn the canopy (B) clockwise until the

canopy (B) locks in place at the narrow section of the

key holes.

□ Align the circular hole on the canopy (B) with the

remaining hole on the mounting bracket (A). Secure

the mounting bracket screw (CC) previously removed

in the hole and tighten the two mounting bracket

screws (CC).

WARNING: Make sure the tab on the mounting bracket (A)

properly sits in the groove in the hanger ball (D) before

attaching the canopy (B) to the mounting bracket (A) by

turning the canopy housing until it drops into place.

NOTE: Adjust the mounting bracket screws (CC) as

necessary until the canopy (B) and canopy bottom cover (C)

are snug.

□ Attach the canopy bottom cover (C) to the mounting

bracket screw (CC) heads on the bottom of the

canopy (B) by inserting the screw heads into the key

slots in the canopy bottom cover (C) and rotating the

canopy bottom cover (C) clockwise.

Attaching the canopy

bottom cover

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

No comments

Hampton Bay YG419-NI Instruction Manual Page 11