Hampton Bay YG419-NI Instruction Manual download pdf (Page 10)

Making the electrical

connections

If you feel you do not have enough electrical wiring

knowledge or experience, have your fan installed by a

licensed electrician.

Follow the steps below to connect the fan to your

household wiring. Use the plastic wire nuts (AA) with your

fan. Secure the wire nuts (AA) with electrical tape. Make

sure there are no loose strands or connections.

□ Connect the ground conductor (PP) of the 120V

supply (this may be a bare wire or a wire with green

colored insulation) to the green ground lead(s) (TT) of

the fan using a plastic wire nut (AA).

□ Connect the fan motor white wire (SS) to the supply

white (neutral) wire (OO) using a plastic wire nut (AA).

□ Connect the fan motor black wire (RR) and the blue

wire (QQ) to the supply black (hot) wire (NN) using a

plastic wire nut (AA).

□ Turn the wire nut (AA) connections upward, spreading

them apart so the green (ground) wire (TT) will be on

one side of the outlet box (LL) and the white (SS),

black (RR) and blue (QQ) wires will be on the other

side, and push them carefully up into the outlet box

(LL).

Assembly — Hanging the Fan (continued)

WARNING: Check to see that all connections are tight,

including ground, and that no bare wire is visible at the wire

nuts (AA), except for the ground wire.

WARNING: To reduce the risk of ﬁre or electric shock, do

not use this fan with any solid-state speed control device.

WARNING: To avoid possible electrical shock, be sure

electricity is turned off at the main fuse box before wiring.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

No comments

Hampton Bay YG419-NI Instruction Manual Page 10