Hampton Bay HB7002-05 Instruction Manual download pdf (Page 5)

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Mounting the hardware

 Thread the fixture mounting screws (EE)

into the provided holes of the mounting

bracket (FF).

 Thread the hex nuts (BB) onto the fixture

mounting screws (EE). Do not tighten the

hex nuts (BB) at this time.

 Pull the supply wires out from the outlet

box and mount the mounting bracket (FF)

to the outlet box using the bracket

mounting screws (DD).

 Place the back plate of the fixture body (A)

over the outlet box and onto the fixture

mounting screws (EE).

 Adjust the fixture mounting screws (EE)

until they protrude out from the back plate

1/4 in.

 Remove the fixture body (A) and secure

the position of the fixture mounting screws

(EE) by tightening the hex nuts (BB)

against the mounting bracket (FF).

Connecting the wires

 Connect the black supply wire to the black

fixture wire using a wire nut (CC).

 Connect the white supply wire to the white

fixture wire using a wire nut (CC).

 Connect the fixture ground wire to the

supply ground wire using a wire nut (CC).

 Wrap all wire connections with electrical

tape for a more secure connection.

Installation

NOTE: If you have electrical questions consult

your local electrical code for approved

grounding methods.

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

Hampton Bay HB7002-05 Instruction Manual Page 5