Hampton Bay 34112 Installation Guide download pdf (Page 9)

8. Installing the

Mounting Plate

Step 1. Remove 1 of the 3 screws from the

mounting ring and loosen the other 2 screws.

(Do not remove)

Step 2. Place the key holes on the mounting

plate over the 2 screws previously loosened from

the mounting ring, turn mounting plate until it

locks in place at the narrow section of the key

holes. Secure by tightening the 2 screws

previously loosened and the one previously

removed. (Fig. 16)

Figure 16

Mounting plate

Mounting ring

Screws

9. Installing the Light

Plate

NOTE: Before starting installation,

disconnect the power by turning off the

circuit breaker or removing the fuse at fuse

box.

Step 1. Loosen the 3 screws from the

mounting plate. (Do not remove)

Step 2. Raise and hold the light plate close

to the mounting plate and proceed to do the

wire connections. Connect the white wire

connectors from the light kit and fan,

follow the same procedure with the black

wire connectors. (Fig. 17)

Step 3. Place the key holes on the light plate

over the 3 screws previously loosened from

the mounting plate, turn light plate until it

locks in place at the narrow section of the key

holes. Secure by tightening the 3 screws

previously loosened. (Fig. 17).

Figure 17

Screws

Light plate

Connection plug

Mounting plate

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments