USE AND CARE GUIDEQuestions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service 8 a.m.
4Making the electricalconnectionsAssembly — Making the Electrical ConnectionsRRTT UUGVVSSJJBBLLMMNNOOPPQQWWFollow the steps below to connect the fan t
Assembly — Finishing the Fan Motor InstallationBBDDDDA5Tightening the screws□ Loosen two of the four mounting bracket screws (DD) from the mountin
Assembly — Attaching the Fan Blades7Fastening the bladeassemblies to the motorWARNING: To reduce the risk of personal injury, do not bend the blade ar
8Attaching the light kit mountingplate to the mounting ring9DHHYYBIIEDB□ Remove one of three mounting ring screws (HH) from the mounting ring (YY)
□ Install the 100 Watt halogen bulb (J) (included).□ Raise the glass shade (F) up against the bottom of the fan housing (B), and secure it to
OperationInstall a 12V MN21/A23 battery (K) (included) in-to the remote control (H). To prevent damage to the remote control (H), remove the battery (
Operation (continued)Care and Cleaning□ Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. B
□ Do not connect the fan with wall mounted variable speed control(s).□ Check to make sure the dip switches from the remote control and receive
PartPartABCDEFGHIJKDescriptionDescriptionMounting bracketFan motor assembly3 bladesLight kit mounting plateLight kit plateGlass shadeReceiverRemote c
Questions, problems, missing parts? Before returning to the store callHampton Bay Customer Service8 a.m. - 6 p.m., EST, Monday-Friday1-800-527-0998HAM
2Table of Contents ...Safety Information ...
3 HAMPTONBAY.COMPlease contact 1-800-527-0998 for further assistance.WARNING: To reduce the risk of fire or electronic shock, this fan must only use a
SPECIFICATIONSSPECIFICATIONSTOOLS REQUIREDTOOLS REQUIREDPhillips screwdriverElectrical TapeWire stripperFlat blade screwdriverStep ladderNOTE: These a
Pre-Installation (continued)HARDWARE INCLUDEDHARDWARE INCLUDEDAABBCCDDEEFFGGHHIIBlade attachment hardware (3/16 in. x 17mm screws and lock washer) Pla
PACKAGE CONTENTSPACKAGE CONTENTSPartPartGHIJKDescriptionDescriptionReceiverRemote controlRemote control holder100W halogen bulb12V MN21/A23 batteryPr
To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger bar (KK) (not included) as shown above.
Assembly — Hanging the Fan 1□ Attach the mounting bracket (A) to the outlet box (JJ) (not included) with the two screws and washers (XX) provided
If you feel you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.This remote control un
Comments to this Manuals