Hampton Bay EW553CH Installation Guide download pdf (Page 3)

drill holes in the wall for the fasteners. The narrow end of the keyhole slot should face up.

5. Make electrical connections.

ELECTRICAL CONNECTIONS:

a. Connect the white wire(s) from the fixture to the white wire of the supply circuit.

b. Connect the black wire(s) from the fixture to the black wire of the supply circuit.

c. Connect the green colored (or bare copper) wire to the grounding conductor of the

supply circuit.

d. Use U.L. Listed wire connectors suitable for the size, type and number of conductors.

No loose strands or loose wires should be present.

e. Secure wire connectors with U.L. Listed electrical tape.

f. Carefully tuck connected wires back into the outlet box.

FINAL ASSEMBLY:

1. Spread the electrical splices so that the black wires are on one side of the outlet box

and the white wires are on the other side.

2. Place the front cover (B) against the back mounting plate (A). Push each socket cup

3. Install light bulbs (D) (sold separately).

CAUTION: Refer to the re-lamping label located near the lamp holder for recommended

maximum wattage. DO NOT exceed the recommended maximum wattage.

4. Restore electricity and check the operation of your new lighting fixture.

ASSEMBLY AND INSTALLATION DIAGRAM:

CLOC

WIS

GREEN OR BARE

(GROUND)

WHITE

(

NEUTRAL

)

BLACK

(

HOT

)

1 2 3 4

No comments

Hampton Bay EW553CH Installation Guide Page 3