Hampton Bay GGE7115A Instruction Manual download pdf (Page 4)

Page 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

1ea Canopy (#1) 1ea Screw Collar Loop (#2) 6 feet Chain (#3) 1ea Ring (#4)

1ea Loop (#5) 1ea Nipple (#6) 1ea Finial (#10) 5ea Socket Sleeves (#12)

1ea Column (#7)

5ea Shades (#13)

ASSEMBLY INSTRUCTIONS:

1. Carefully unpack the fixture. Lay out all parts on a clean surface. Evenly spread

the fixture arms to open the chandelier (see Fixture Distribution on Page 5).

2. Screw the Loop (#5) onto the Nipple (#6). Use pliers and a screwdriver to twist

open the link (cover the chain with cloth to prevent damage to the link finish) at

the end of the Chain (#3) not attached to the Screw Collar Loop (#2). To avoid

damage to the link, only open the link enough to hook it onto the Loop (#5).

Hook the open link to the Loop (#5) and then close the link.

3. Screw the Column (#7) onto Nipple A (#8). Screw the Finial (#10) onto Nipple

B (#9).

4. Weave the fixture wires up through the Loop (#5), through the Chain (#3),

through the Ring (#4), through the Screw Collar Loop (#2), through the Canopy

(#1), and through the Nipple (#20 on Page 7) on the Mounting Strap (#19 on

Page 7). Screw the Nipple (#20) into the Screw Collar Loop (#2).

5. Place the Socket Sleeves (#12) and then the Shades (#13) over the Sockets (#11).

6. Install five 60 watt candelabra incandescent light Bulbs (#14) (not included) or

five equivalent candelabra compact fluorescent light bulbs (not included) in the

five Sockets (#11).

1 2 3 4 5 6 7 8 9 ... 23 24

No comments

Hampton Bay GGE7115A Instruction Manual Page 4