Page 19
AVERTISSEMENT:
1. Avant de commencer à installer ce luminaire ou d'enlever l'ancien luminaire,
déconnectez le courant en éteignant le disjoncteur ou en enlevant le fusible
correspondant du coffret à fusibles.
2.
CONSULTER UN ELECTRICIEN QUALIFIE POUR TOUTE
QUESTION RELATIVE A L'ELECTRICITE.
3.
En cas de questions non relatives à l'électricité à propos de ce luminaire,
veuillez contacter notre centre de Service à la Clientèle au 1-877-527-0313
ou visiter www.homedepot.com. Veuillez indiquer votre UGS 583-526 ou
UPC 725916805067.
4. Conserver votre reçu et ces Instructions comme Preuve d'Achat.
OUTILS REQUIS POUR L'ASSEMBLAGE & L'INSTALLATION
(non inclus):
3 Ampoules Lunettes de Protection Echelle Gants Dénudeur de
(60 watts maxima) Câbles Electriques
(ou équivalent LFC)
Tournevis à Tête Plate Tournevis à Croisillon Ruban Adhésif Isolant Pince pour Câbles Electriques
Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
2ea Outlet Box Screws (#11) 3ea Wire Connectors (#12) 1ea Mounting Strap (#13)
1ea Ground Screw (#14) 2ea Mounting Screws (#15)
INSTALLATION INSTRUCTIONS:
1. Screw the two Mounting Screws (#15) into the Mounting Strap (#13). Mount the
Mounting Strap (#13) to the Outlet Box (#10) using the two Outlet Box Screws (#11).
[Make sure the heads of the Mounting Screws (#15) are facing outside when the
Mounting Strap (#13) is attached to the Outlet Box (#10).]
2. Wrap the ground wire from the fixture around the Ground Screw (#14) on the Mounting
Strap (#13), and then connect the ground wire from the fixture to the ground wire from
the Outlet Box (#10). Connect the white wire from the fixture to the white wire (neutral
wire) from the Outlet Box (#10). Connect the black wire from the fixture to the black
wire (live wire) from the Outlet Box (#10). Cover the three connections using the three
Wire Connectors (#12). Wrap the three wire connections with electrical tape for a more
secure connection. Position the wires back inside the Outlet Box (#10). Note: If you have
electrical questions, consult your local electrical code for approved grounding methods.
3. Place the Canopy (#1) over the Outlet Box (#10). Allow the heads of the Mounting
Screws (#15) to come out through the large ends of the keyholes on the Canopy (#1).
Twist the Canopy (#1) clockwise until the heads of the Mounting
Screws (#15) slide into
the narrow ends of the keyholes. Tighten the Mounting Screws (#15) to secure the
Canopy (#1).
4. Before completing Installation, please return to the Assembly Instruction #4.
5. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn the
light switch on to activate the fixture.
(1 pages)
(2 pages)
(21 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals