Hampton Bay 77003-BZ Instruction Manual download pdf (Page 6)

Installation (continued)

Attaching the track rail

Closing the track contacts

□ Ensure that the ground side of the track rail (E)

(exposed copper wire on top of the track rail) is

facing the ceiling.

□ Align and insert the contacts on the support stems

(D) with the contact channel on the track rail (E),

making sure the “N” line contact inserts into the

upper channel, the “L” line contact inserts into the

lower channel, and the ground tab (1) rests on the

copper ground on top of the track rail (E).

□ Close the connector tight and rethread the

decorative collar (C) to lock the track contacts

closed.

Shaping the track

□ Refer to the following figure for recommended

shapes. Do not make any sharp bends in the track.

Do not bend the track more than 90 degrees within a

10 in. portion of the track.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Hampton Bay 77003-BZ Instruction Manual Page 6