Hampton Bay 15410 Instruction Manual download pdf (Page 2)

Shade Speci cations

WARNING:

ALTERNATE SHADE SIZING. The recommended shades shown on the back of the lamp package are properly sized for use with the lamp. If an

alternate shade is used, measurements must be checked according to the Specifications this section.

Caution:

Using an oversized shade may cause  xture to easily tip over.

Choose bulb wattage. Do not exceed socket label rating.

Find the minimum Cylinder Diameter (CD) of a shade that matches your selected bulb wattage. Choose a shade with at least that minimum Cylinder

Diameter (CD).

For that selected wattage, measure the Critical Height (H) from the socket bottom.

Use only shades that exceed the minimum Critical Radius (r) for that bulb wattage to all points on shade sides.

(CD)

Bulb Filament

(h)

(r)

Lamp holder

base size

Medium

Bulb

Lamp Center line Length

***(h) Critical Height

Minimum Opening

*(CD) Cylinder Diameter

Minimum Lamp to Shade distance

**(r) Critical Radius

25 W

40 W

60 W

75 W

100 W

150 W

Wattage Type

2-3/4

3-1/4

(69.8)

(82.5)

3.5

4.5

(76.2)

(88.9)

(101.6)

(114.3)

1-5/8

2-1/2

2-7/8

3-1/2

4-3/4

(41.2)

(50.8)

(63.5)

(73.0)

(88.9)

(120.6)

Inches (mm) Inches (mm) Inches (mm)

*CD = Cylinder Diameter

The minimum diameter of a cylinder, as determined by the bulb wattage in the chart, which must be

able to pass through the openings in the top and bottom of the shade

**r = Critical Radius

The critical radius is determined by measuring the minimum distance from the center point of the

bulb filament to nearest point on a shade.

***h = Critical height

The critical height is measured from a horizontal line through the depresses center contact of the

vertically mounted Edison base lamp-holder to the line where the bulb filament crosses the bulb

centerline.

Warranty

The manufacturer warrants this portable luminaire to be free from defects in materials and workmanship for a period of one (1) years from date of

purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to

be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion,

provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall

not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with

the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation,

or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as

surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether

expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and

shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or

repair of said product.

Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com