Hampton Bay 15261 Installation Guide download pdf (Page 6)

Page 6

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

1 Ground Screw (#5) 3 Wire Connectors (#9) 2 Outlet Box Screws (#4)

1 Mounting Plate (#6) 2 Screw (#8)

INSTALLATION INSTRUCTIONS:

1. Attach the Mounting Plate (#6) to the Outlet Box (#7) with the two Outlet box

screws (#4) as shown. The side of the mounting plate marked “GND” must face out.

2. Connect the white wire from the fixture to the white wire from the Outlet Box (#7),

and the black wire from the fixture to the black wire from the Outlet Box (#7). Cover

the two wire connections using the two provided Wire Connectors (#9). Wrap the

two wire connections with electrical tape for a more secure connection. If your outlet

box has a ground wire (green or bare copper), connect fixture’s ground wire to it

using the wire connector (#9). Otherwise connect the copper ground from the fixture

to Ground screw (#5) on the Mounting Plate (#6). Note: If you have electrical

questions, consult your local electrical code for approved grounding method.

3. Place Fixture Body (#3) over Mounting Plate (#6) and secure with Screws (#8).

4. Install the proper light bulbs (not included) for your fixture. (DO NOT EXCEED

THE SPECIFIED WATTAGE!)

5. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn

the light switch on to activate the fixture.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

Hampton Bay 15261 Installation Guide Page 6