Hampton Bay PG139HDS Use and Care Manual download pdf (Page 10)

Assembly (continued)

Assembling the Table

Assembling the Burner

Assembly

□ Attach the Table Assembly (G and H) to the Post

(D).

NOTE: When the Table (G) is well attached,

please follow the steps below to adjust the

height:

a. Adjust the grip until it is vertical to the Post.

b. Adjust the height of the table as you like.

c. Fix the position of the table by turning the grip

clockwise.

d. Turn until the grip is fixed.

□ Feed the valve and gas hose and connect the

Burner Assembly (C) to the Post (D).

□ Feed the valve and gas hose into and go through

the Post (D).

□ Screw the Burner Assembly (C) onto the Post (D)

until the holes on the Upper Post Assembly (N) are

aligned to holes on top of the Post (D). Attach using

three M5 x 10 mm Pan Head Bolts (DD). Ensure

they are fully tightened.

□ Reassemble the M5 x 10 mm Bolt (1) to the Post

(D) in order to limit the height of the Table (G).

NOTE:

a. Open the igniter cap by unscrewing the cap

counterclockwise.

b. Take out the battery included in the pack of

Instruction manual.

c. Insert the battery to the igniter.

d. Screw the igniter cap back

M5 X 10 Pan Head Bolt

X 3

＋

－

Ignltor

Battery

M5 X 10 mm Bolt

Ignitor

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

No comments

Hampton Bay PG139HDS Use and Care Manual Page 10