Hampton Bay EC581SBA Use and Care Manual download pdf (Page 3)

ASSEMBLY INSTRUCTIONS (AS SHOWN IN DIAGRAM)

Before beginning the installation, first unpack the package, rotate the adjustable bar

to the other side according to the direction of the arrow in diagram 2, and then secure

the arm in place on the canopy with the set screw(s) provided. (See diagram 1).

1. Make sure the main power to the circuit is OFF by turning off the circuit breaker

or by removing the appropriate fuse at the fuse box.

2. Install mounting bracket to existing outlet box with screws.

3. Pull wires through the mounting bracket.

A: Make ELECTRICAL CONNECTIONS: Connect the white (neutral) wire(s)

from the fixture to the white (neutral) wire of the supply circuit. Connect the

black (hot) wire(s) from the fixture to the black (hot) wire of the supply circuit.

Connect the green or bare copper (ground) wire to the green or bare copper

(ground) wire of the supply circuit. Use UL/CSA listed wire connectors

suitable for the size type, and number of conductors. No loose strands or loose

wires should be present. Secure wire connectors with UL/CSA listed electrical

tape.

B. Carefully tuck connected wires back into the outlet box.

4. Secure the canopy to the mounting bracket with provided screws.

5. Twist and lock the bulbs into the sockets, then secure the shade ring(s).

INSTALLATION AND REMOVAL OF BULB:

1. TURN POWER OFF.

2. To insert bulb: Align the 2 poles on the bulb to the socket holes. Rotate the bulb

until it is secured. (See diagram)

3. Removal of bulb: Remove the shade ring and rotate the bulb counterclockwise

until it can be removed from the socket. Replace with new bulb following step

#2 above.

4. Note: Make sure to install the shade ring after installing the light bulb.

CAUTION: Refer to the re-lamping label located on the fixture for recommended

maximum wattage. Do not exceed recommended wattage.

ASSEMBLY DIAGRAM:

Diagram 1

Fixture ba

Set screw

Washe

1 2 3 4 5 6 7 8 ... 11 12

No comments

Hampton Bay EC581SBA Use and Care Manual Page 3