Hampton Bay HB3432-35 Installation Guide download pdf (Page 8)

1 ea Threaded Ring (#16)

INSTALLATION INSTRUCTIONS:

PARTS INCLUDED FOR INSTALLATION (parts are not to

scale):

1 ea Mounting Bracket (#10)

2 ea Mounting Screws

(#11)

2 ea Hex Nuts (#12)

3 ea Wire Nuts

(#18)

Page 8

1 ea Nipple (#13)

1 ea Screw Collar Loop (#14)

1. Thread the two Hex Nuts (#12) onto the Nipple (#13) to its approximate

midpoint. Thread the Nipple (#13) in through the center hole of the Mounting

Bracket (#10) approximately 1/3 of the way. Do not tighten the Hex Nuts

(#12). (Fig. 5)

2. Pull the Supply Wires and the Supply Ground Wire (#17) out from the Outlet

Box (#9). Attach the Mounting Bracket (#10) to the Outlet Box (#9) by

feeding the Mounting Screws (#11) through the slots of the Mounting Bracket

(#10) and tightening them into the mounting holes of the Outlet Box (#9).

(Fig. 5)

3. Thread the Screw Collar Loop (#14) 8 to 9 turns onto the bottom end of the

Nipple (#13). Tighten the bottom Hex Nut (#12) against Screw Collar Loop

(#14). (Fig. 5)

1 ea Canopy (#15)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 41 42

No comments

Hampton Bay HB3432-35 Installation Guide Page 8