Hampton Bay ES4768OB4 Installation Guide download pdf

8 a.m. - 6 p.m., EST, Monday - Friday

1-877-527-0313

Installation

Part Description

Long threaded rod assembly (15.6 in.)

Lamp plate

Fabric shade assembly

Decorative frame

Canopy assembly

Straight rod assembly (14.5 in.)

Short threaded rod assembly (5.5 in.)

Diffuser

TOOLS REQUIRED

Hardware not shown to actual size.

HARDWARE INCLUDED

Making the electrical connections

Attaching the canopy to the ceiling

Questions, problems, missing parts? Before returning to store,

HOMEDEPOT.COM

Safety Information

Contact the Customer Service Team at 1-877-527-0313 or visit www.homedepot.com.

Warranty

PACKAGE CONTENTS

Pre-Installation

call Commerial Electric Customer Service

Pre-Installation

Quantity

NOTE:

Retain this manual for future use.

Secure the fabric shade assembly (G) to the short

threaded rod assembly (E) using the hex nut to adjust

as needed.

Install the light bulbs (sold separately).

Installing the short threaded rod assembly

and the bulb

□

USE AND CARE GUIDE

PENDANT FIXTURE

We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this pendant xture.

We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of

products available for your home improvement needs. Thank you for choosing Hampton Bay!

THANK YOU

Item #**********

Model #ES4768OB4

Troubleshooting

Ladder Gloves

Safety goggles

Phillips screwdriver Electrical tape

Wirestripper

Wrench

Chain assembly

Installing the straight rod assembly

Open the links on the straight rod assemblies (D) using the

wrench.

□

Hang the straight rod assembly (D) links from the loops of the

lamp plate (B) and tighten with a wrench.

□

Hang the decorative frame (F) from the bottom of the straight

rod assemblies (D).

□

Installation

Wrap electrical tape (not included) around the wire

connectors (BB), and ensure they are secure.

□

Raise the canopy (A) up to the outlet box.

□

Secure the canopy (A) to the mounting bracket

assembly (CC) using the decorative nuts (DD) provided.

Push all excess wire and wire connections back

into the outlet box.

Adjust the length of the mounting bracket assembly (CC)

studs and hex nuts if necessary.

Installing the mounting bracket assembly

Make sure the power is off.

□

Pull the supply wires down out of the outlet box.

□

Attach the mounting bracket assembly (CC) to the existing

outlet box with the outlet box screws (AA) provided.

□

Outlet box

Installing the long threaded rod

assembly and the lamp plate

□

Weave the xture wires up through the chain assembly

(I) links, and then up through the canopy assembly (A).

Attaching the canopy assembly to

the long threaded rod assembly

□

Open the link on the chain assembly (I) and

hang it from the loop on the canopy assembly (A).

□

Place the lamp plate (B) onto the long threaded

rod assembly (C).

Screw the canopy assembly loop (A) and the long

threaded rod assembly (C) together.

□

Secure the long threaded rod assembly (C) to

the fabric shade assembly (G).

Installing the diffuser and the decorative

frame

Secure the diffuser (H) to the short threaded rod assembly

(E) using the diffuser nut (EE).

□

Place the decorative frame (F) over the fabric shade

assembly (G) and clip it in place.

□

Attach the ground wire from the outlet box to the ground

screw on the mounting bracket (CC), which is green and

marked "GND".

Remove the pre-assembled decorative nuts (DD)

from the mounting bracket assembly (CC).

5-YEAR LIMITED WARRANTY

or workmanship, the product must be returned, with a copy of the bill of sale as proof of purchase, to the

original place of purchase. The manufacturer will, at its option, repair, replace, or refund the purchase price

excludes liability for direct, incidental, or consequential damages. Some states do not allow exclusions

or limitations on an implied warranty, so the above exclusions and limitations may not apply. This warranty

of ve year(s) from the date of purchase. If within this period the product is found to be defective in material

□

Read all instructions prior to beginning the

installation process.

Make sure the power is turned off at the

electrical panel box before beginning your

installation. Turning the power off at the wall

switch is not sufcient to prevent electrical

shock.

IMPORTANT SAFETY INSTRUCTIONS

(Save These Instructions)

This xture is intended to be mounted to a 4 in.

square x 2-1/8 in. deep metal octagon outlet box.

The box must be directly supported by the

building structure.

CAUTION: Keep the lamp away from

materials that may burn.

CAUTION: Turn off/unplug the light and

allow it to cool before replacing the bulb.

WARNING: Do not install this lighting

system in a wet location.

Care and Cleaning

□

To clean the xture, rst disconnect the power to the xture by turning off the circuit breaker or by

removing the fuse at the fuse box.

□

CAUTION: Do not use chemical solvents or harsh

abrasives to clean the xture or components, as damage

may occur.

Use a dry or slightly dampened, clean cloth (use clean water, never use a solvent) to wipe the

interior and exterior surfaces of the xture.

Allow the xture to dry completely before power is restored.

□

All electrical connections must be in accordance

with local codes and the National Electrical Code.

If you are unfamiliar with methods of installing

electrical wiring, secure the services of a

qualied licensed electrician.

Outlet box screws

x 2

Wire connectors

x 3

Mounting bracket assembly

x 1

Decorative nut

x 2

Diffuser nut

x 1

Problem Possible Cause Solution

The light bulb will not

illuminate.

The light bulb is burned

out.

Replace the light bulb.

The power is off.

Make sure the power supply is on.

There is a faulty wire

connection.

Check the wiring.

Contact a quali

ed and licensed

electrician if you are not comfortable

troubleshooting wiring problems.

There is a faulty switch.

Test or replace the switch.

There are crossed wires,

or the power wire is not

properly grounded.

Check the wire connections.

The fuse blows or the circuit

breaker trips when the light bulb

is illuminated.

Connect the negative wires (raised ribs without writing)

from the xture to the negative wires from the supply

circuit, the positive wires (smooth with writing) from the

xture to the positive wires from the supply circuit, and the

ground wire (bare) from the xture to the ground wire from

the supply circuit using the wire connectors (BB).

CAUTION: Refer to the re-lamping label located on

the xture. Do not exceed the recommended wattage.

USE AND CARE GUIDE 1

Summary of Contents

Page 1 - USE AND CARE GUIDE

8 a.m. - 6 p.m., EST, Monday - Friday 1-877-527-0313InstallationInstallationPart DescriptionLong threaded rod assembly (15.6 in.)Lamp plateBACFabric s

Hampton Bay ES4768OB4 Installation Guide

Browse online or download Installation Guide for Unknown Hampton Bay ES4768OB4. Hampton Bay ES4768OB4 Installation Guide User Manual

Summary of Contents

More documents for Unknown Hampton Bay ES4768OB4

Comments to this Manuals

Hampton Bay ES4768OB4 Installation Guide

Browse online or download Installation Guide for Unknown Hampton Bay ES4768OB4. Hampton Bay ES4768OB4 Installation Guide User Manual

Summary of Contents

More documents for Unknown Hampton Bay ES4768OB4

Comments to this Manuals

Related products and manuals for Unknown Hampton Bay ES4768OB4