Hampton Bay 59299 Instruction Manual download pdf (Page 6)

Installation

MOUNTING OPTIONS

WARNING: To reduce the risk of re, electric shock or

personal injury, mount to outlet box marked “acceptable

for fan support of 35lbs. (15.9kg) or less” and use screws

provided with the outlet box. An outlet box commonly

used for the support of lighting xtures may not be

acceptable for fan support and may need to be replaced.

If in doubt, consult a qualied electrician.

If your ceiling fan does not have an existing UL-Listed

mounting box, then install one using the following instructions:

□ Disconnect the power by removing the fuses or turning off

the circuit breakers.

□ Secure the outlet box directly to the building structure.

Use the appropriate fasteners and materials. The outlet box

and its bracing must be able to fully support the weight

of the moving fan (at least 35 lbs. (15.9 kg)). Do not use a

plastic outlet box.

The illustrations below show three different ways to mount the

outlet box.

If the canopy touches the downrod, then remove the decorative canopy

bottom cover and turn the canopy 180° before attaching the canopy to

the mounting plate.

To hang your fan where there is an existing xture but no ceiling joist,

you may need an installation hanger bar as shown above

(available at any Home Depot store).

NOTE: You may need a longer downrod to maintain

proper blade clearance when installing on a steep, sloped

ceiling. The maximum angle allowable is 30° away from

horizontal.

Outlet Box

Recessed

Outlet

Box

Provide Strong

Support

Ceiling

Mounting

Plate

Outlet Box

Hanger Bar

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

Hampton Bay 59299 Instruction Manual Page 6