Hampton Bay 54616241 Instruction Manual download pdf (Page 6)

Your ﬁxture is made from quality materials that will last many years with minimum care. You may want to

periodically clean the diffuser, or interior of ﬁxture using a mild, non-abrasive glass cleaner and a soft cloth.

DO NOT use solvents, or cleaners containing abrasive agents. When cleaning the inside of the ﬁxture, make sure

you have the power turned off, and do not spray liquid cleaner directly onto the LEDs, LED driver or wiring.

Problem Possible Cause Corrective Action

The power is off. Check if power supply is on.

The ﬁxture does not light. There is a bad wire connection. Check the wiring.

The switch is defective. Test or replace the switch.

The fuse blows or circuit breaker The wires are crossed or the power wire Check the wiring connections.

trips when the light is turned on. is grounded out.

Minor problems often can be ﬁxed without the help of an electrician.

Mounting to the housing

plate

■

Position the diffuser (B) over the

housing (A).

Closing the diffuser latches

■

Turn the four diffuser latches to the right

until they are closed.

■

Restore power to the electrical box. Turn

the light switch on to activate the ﬁxture.

Installation (continued)

Troubleshooting

Care & Cleaning

CAUTION: Before attempting to clean the ﬁxture,

disconnect the power to the ﬁxture by turning the breaker

off or removing the fuse from the fuse box.

WARNING: Before doing any work on the ﬁxture,

shut off power supply at the circuit panel to avoid

electrical shock.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Hampton Bay 54616241 Instruction Manual Page 6