Hampton Bay 25088 Installation Guide download pdf

INSTALLATION INSTRUCTIONS

Rev. 02/09/2009

READ AND SAVE THESE INSTRUCTIONS

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

Fig. 2

Fig. 1

MOUNTING THE FIXTURE (Fig. 1)

1. Shut off power at the circuit breaker and remove

old fixture, including the mounting hardware.

2. Carefully unpack your new fixture and lay out all

the parts on a clear area. Take care not to lose

any small parts necessary for installation.

3. Attach the Circular Strap (B) using Junction Box

Screws (C) to the Outlet Box. The side of the

Circular Strap marked “GND” must face out.

4. Thread the two Studs (A) part way into Circular

Strap (B).

CONNECTING THE WIRES (Fig. 2)

5. At this point, connect the electrical wire as shown

in Fig. 2, making sure that all wire connectors are

secured. If your outlet has a ground wire (green or

bare copper), connect the fixtures Ground Wire to

it. Otherwise, connect the fixture Ground Wire

directly to the circular strap using the Green

Screw provided. After wires are connected, tuck

them carefully inside the Junction Box.

FINISHING THE INSTALLATION (Fig. 1)

6. Place Fixture Body (D) into the Studs (A) and

secure it tightly using Cap Nut (E).

7. Place the Glass shades (F) over the Socket and

tighten with Screw Shell (G).

8. Install the light bulb in accordance with the

fixture’s specifications. (DO NOT EXCEED THE

MAXIMUM WATTAGE RATING!)

Your installation is now complete. Return power to

the outlet box and test the fixture.

Note: Illustration (Fig. 1 ) on this manual is for

installation purposes only. It may or may not be

identical to the fixture purchased.

LA-1299E/S

FIXTURE

WIRES

Black or

Smooth

USE

WIRES

Black

(Hot)

FIXTURE

WIRES

White or

Ribbed

USE

WIRES

White

(Neutral)

FIXTURE

WIRES

Bare

Copper

(Ground)

USE

WIRES

Green

(Ground)

In the event that you should have any installation question or are missing parts,

please contact Customer Service. Customer service may be reached

weekdays a 1-800-527-0998 between the hours of 8:00am and 5:00pm PST

(Pacific Standard Time).

1 2

Summary of Contents

Page 1

INSTALLATION INSTRUCTIONS Rev. 02/09/2009 READ AND SAVE THESE INSTRUCTIONS WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAK

Page 2 - LA-1299E/S

INSTRUCCIONES PARA LA INSTALACION Rev. 02/09/2009 AGUARDE ESTAS INSTRUCCIONES ADVERTENCIA! CORTE LA CORRIENTE DESDE EL FUSIBLE O EL INTERRUPTOR CEN

Comments to this Manuals

No comments

Hampton Bay 25088 Installation Guide

Browse online or download Installation Guide for Unknown Hampton Bay 25088. Hampton Bay 25088 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown Hampton Bay 25088