Hampton Bay 22687-012 Installation Guide download pdf (Page 3)

Page 6 Page 3

ADDITIONAL PARTS FOR INSTALLATION (included):

3. Outlet Box

Screw (x2)

4. Universal Cross

Bar

7. Finishing Nut

(x2)

5. Ground Screw

6. Canopy

2. Wire Nut (x3)

8. Mounting Screw

(x2)

TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION

(not included):

ADDITIONAL PARTS FOR ASSEMBLY (included):

Safety goggles Wire Strippers Flathead

Screwdriver

Phillips

Screwdriver

11. Center Rod

16. Decorative

Spacer

12. Hanging Rods

(x3)

17. Decorative

Finial

13. Bottom

Threaded Nipple

15. Glass Shade

Electrical Tape

Wire Cutters

B10 Bulb 60W max.

(not included) (x3)

Ladder

18. Lock Nut

INSTALLATION INSTRUCTIONS:

1. Turn off power at main fuse box.

2. Mount universal cross bar (4) to junction box (1) with outlet box screw (3). Make

sure black and white wires of junction box (1) run through the middle opening of the

universal cross bar (4).

3. Fasten open end of ground wire (bar copper or green wire), to ground wire or ground

screws (5) of junction box (1) or ground screws (5) on universal cross bar (4). (Refer

to Figure #1)

4. Connect black wire of power supply to black wire of the xture and connect the white

wire of the power supply to the white wire of the xture. (Refer to Figure #1)

NOTE: Always use wire nuts (2) or marrettes (included) to connect wire and push all

excess wire and connections back into junction box (1).

5. Mount canopy (6) over universal cross bar (4) and tighten with 2 nishing nuts (7).

1 2 3 4

Comments to this Manuals

No comments

Hampton Bay 22687-012 Installation Guide Page 3

Comments to this Manuals

Related products and manuals for Unknown Hampton Bay 22687-012