Hampton Bay 03722 Instruction Manual download pdf

INSTALLATION INSTRUCTIONS

FOR HAMPTON BAY DUAL MOUNT LIGHT FIXTURES

NOTE: READ AND SAVE ALL INSTRUCTIONS!

NOTE: This is a dual use light kit that allows you to install it to the ceiling as a light fixture. It also provides the

feature of being convertible to install directly to a Hampton Bay ceiling fan. Please read this manual thoroughly

and follow the steps below for a correct and safe installation.

A. Wire connectors (2)

B. Circular Strap with ground screw

C. Ground wire

D. Mounting screw (2)

E. Small Hex Nuts (2)

F. Canopy (1)

G. Decorative nuts (2)

H. Upper cap (1)

I. Light fixture

J. Glass shade

K. Lower cap (3, w/ grommet hole)

L. Lower cap (3, no grommet hole)

M. Finial (3)

N. 13 Watt compact fluorescent bulbs (2)

A. CEILING LIGHT FIXTURE INSTALLATION:

WARNING

To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box

before beginning.

All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical

installation should be performed by a qualified licensed electrician.

This fixture must be mounted to an approved outlet box that is directly supported by the building structure.

STEP 1: Locate and thread the two mounting screws

STEP 2: Locate and install the two small hex huts on the

STEP 3: Attach the circular strap on the outlet box using

the two outlet box screws supplied in the pack. Tighten

the two outlet box screws securely. Leave the wires

exposed coming from the outlet box as shown in Figure 2.

Figure 1

mounting screw

circular strap

small hex nut

Model No.: 03702 , 03712, 03722

K1. Glass Lower cap (1, w/ grommet hole)

O. Outlet Box screw (2)

This light kit will only fit on Hampton Bay listed fans. If any question, please call 1-877-898-1881 for

assistance.

M1. Plastic Finial (1)

P. Lock washer (2)

Q. Hex Nut (1)

Remark: Part shapes of J, K, L and M

will vary per each actual model.

R. Pull chain (2)

supplied in the pack into the circular strap threaded holes

as shown in Figure 1.

mounting screws and tighten until properly against the

circular strap.

Figure 2

circular strap

Outlet box

screw

Supply wires

mounting

screw

1 2 3 4

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS FOR HAMPTON BAY DUAL MOUNT LIGHT FIXTURESNOTE: READ AND SAVE ALL INSTRUCTIONS!NOTE: This is a dual use light kit that allows

Page 2 - Figure 5

STEP 4: Lift up light fixture to make wire connections. Please refer to Figure 3 and 4.Note: make sure the power is off.1. Disassemble the

Page 3 - Figure 7

B. CEILING FAN LIGHT KIT INSTALLATION:WARNINGTo reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fu

Page 4 - Figure 10

C. INSTALLATION OF LIGHT KIT TO FANS WITH REMOVABLE SWITCH CAUTION: Make sure power is removed from the fan before attempting to install the light kit

Comments to this Manuals

No comments

Hampton Bay 03722 Instruction Manual

Browse online or download Instruction Manual for Car kits Hampton Bay 03722. Hampton Bay 03722 Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals